You can rest assured to buy Nail-free adhesive Nail-free glue Nail-free sealant Glass Glue Polymer Metal Adhesive Sealant Fix Waterproof Quick Drying Glue from our factory and we will offer you the best after-sale service and timely delivery.
NAIL—FREE ADHESIVE
Nail-free adhesive Nail-free glue Nail-free sealant Glass Glue Polymer Metal Adhesive Sealant Fix Waterproof Quick Drying Glue Description:
598W is a nail-free adhesive with extremely adhesive
force and bonding ability, is aimed to replace the metallic nail as
general-purpose adhesive, and it doesn't require drilling holes for fixing and
bonding materials such as wood, MDF board, gypsum board, stone, concrete,
ceramics, metal, plastic, rubber and so on.
Application:
Replace nails to fix and bond wood, MDF board, gypsum board, stone,
concrete, ceramics, metal, plastic, rubber, steel, PVC panels and other
materials.
Color:
Clear, white, light yellow
Features:
1. Strong bonding property, high bonding strength;
2. High flexibility, bonding power not affected by shrink of building;
3. Wide application range, suitable for most of materials, even wet wood;
4. Suitable for filling gaps, cracks; Painting can be done after adhesive
hardens;
5. Excellent weathering-resistance, water-proof property;
6. Non-toxic, no pollution, free of hazardous substances like benzene,
formaldehyde, etc.
Using Method:
1. Surface preparation: Bonding surface should be clean and free of dust
and rust.
2. Cut up the tube top, put the adhesive mouth and squeeze out the
adhesive by sealing gun.
---Dry Bonding: (suitable for light materials & joints for light
pressure)
Squeeze out the adhesive in form of "Z" ,line distance about
40cm. Apply to material A, then press to bonding area B lightly, wait for a few
minutes about 5~8 minutes, then press the two surfaces with strong pressure.
---Wet Bonding: (Suitable for heavy materials)
Apply the adhesive same way as above, then clamp or fasten up the two
materials by tools like pliers, screws to maintain maximum surface contact at
bonded interfaces. Fix and wait for 24 hours till the adhesive dries, then
remove the fixing tools. The adhesive is movable within 20 minutes since
bonding, becomes stronger 2~3 days after bonding, reaches best performance after
7 days.
Storage:
Keep nail-free adhesive out of direct sunlight and store in cool, dry and
ventilated place.
Keep the tube securely sealed
Discharge the waste adhesive only after it becomes totally dry.
Don't pour into water tubes.
shelf
life: 18 months since the production date
Clean-Up:
Any wet or partially wet adhesive can be removed with scraping; Dried
adhesive is best removed with a scraper or by sanding.
Packing:
6G\12G\300ML
Notes:
Please try small
quantity before massive use.
Before adhesive hardens, it can be removed with turpentine.
After adhesive dries, it can be removed by scrape or rubbing.
Suitable for paving floor board
Adhesion power will be weakened under high temperature. Avoid bonding
metal exposed to sunshine for long time.