TS4108A is a red epoxy SMD adhesive that meets international environmental regulations. As a one-part, heat-curable product, it is designed for PCB SMD bonding. Its excellent thixotropy allows precise high-speed dispensing or stencil printing. High cured strength, plus REACH and RoHS compliance, ensure safety. No mixing required, reducing chemical exposure risks.
Features & Benefits of Red Glue Epoxy Resin Adhesives TS4108A
Tensan SMD red glue 4108A is a one-component epoxy adhesive, curing at high temperature.
It is designed for SMD components on printed circuit board bonding. 4108A has suitable for high-speed SMT placement machine Dispensing and stencil printing.
It is of high adhesive strength after curing .
◆ REACH, ROHS, certified
◆ Excellent thixotropy
◆ Good adhesive strength after curing
◆ Easy to mix and use
Instructions and Precautions of Red Glue Epoxy Resin Adhesives TS4108A
Cold storage 4108A to be rewarmed before use, 30ml syringe to be 1 hour, 300ml 24 hours. Storage tank or dispensing mouth temperature at 25℃-30℃ can
help improve the high-speed dispensing effect.
Precautions of Red Glue Epoxy Resin Adhesives TS4108A:
1.In order to avoid contaminating unused glue, any glue can not be back into the original packaging.
2.Glue placing in the air will absorb trace moisture performance, which will influence the properties of glue, so it should be avoided. In the stencil printing,
do not put SMT printed circuit board in the air for too long,
patch curing as soon as possible, if possible, air humidity should be controlled.
Packing Information
30ml/syringe
200g/syringe
Storage andValidity
2-8℃, cool and dry place, it can be stored for 6 months; room temperature (25℃), it can be stored for 1 month.
Typical Properties of Red Glue Epoxy Resin Adhesives TS4108A
|
Item |
Index |
|
Specific Gravity (g/cm3) |
1.28 |
|
Viscosity at 5rpm 25℃ |
300.000cps |
|
Adhesive Strength ( 2125c) |
44N(4.5kgf) |
|
Adhesive Strength (Mini-mold tr) |
45N(4.6kgf) |
|
Adhesive Strength (SOP-IC 16P) |
92N(9.4kgf) |
|
Thixotropy Index |
6.3 |
|
Electric Property (Ω.cm) |
2.6*10^16 |
|
Resistance Insulation (Ω.cm) |
1.0*10^14 |
|
Resistance Initial Value (Ω.cm) |
1.2*10^12 |
|
Curing Condition |
150℃/60sec 130℃/90sec
|
|
Applying Method |
High -speed dispenser |
|
Dielectric Constant |
3.62/MHz |
|
Dielectric Loss Tangent |
0.013/1MHz |
|
Preservation Condition |
Refrigerated storage at 2-8℃ |
|
Package Style |
30ml/syringe 200g/syringe |
Other Information
The above information are correct, but does not contain all of the information and can only be used as a guide.
This product is ROHS, REACH, compliant. It does not contain any unknow carcinogenic, mutagenic or teratogenic components.
For further info please visit our web:
