When using two-component potting glue, there are certain operating techniques to follow. Understand the specific operation process and carry out glue mixing and pouring step by step, which greatly improves the use value. Pay more attention to various matters to improve the effect after curing.
How to use two-component adhesive correctly?
1. Weigh the main agent and curing agent according to the weight ratio, do not mix according to the volume ratio.
2. Before formal mixing, stir the AB agent separately for about 3 minutes until uniform. Then mix the AB agent according to the proportion.
3. If you are worried about the poor effect of manual mixing, you can directly choose machine mixing.
4. If necessary, perform vacuum degassing to completely eliminate bubbles.
5. Adjust the amount of glue according to the amount used, and perform potting at an even speed.
6. Seal unnecessary adhesive immediately to avoid premature curing.
What precautions should be taken when using potting glue?
1. Before use, check whether the two sets of materials are damaged. If there is any damage, please use it with caution.
2. Stir Agent A separately before mixing to avoid settling.
3. Before curing, it should not be exposed to wind, sun or rain. Try not to expose it outdoors.
4. When mixing glue, clean the container to avoid leaving unused materials.
5. If you want to attach a large amount to a certain material, you need to conduct experiments in advance and master the specific machine.
6. Choose high-quality adhesives and don’t buy inferior ones just to save money. Buy products of reliable quality to minimize accidents. You can feel more at ease by cooperating with powerful suppliers, such as TENSAN, which focuses on potting adhesive research and provides customized potting adhesive application solutions. It has a wide range of uses and can be used in new energy, military industry, medical, aviation, shipbuilding, electronics, and automobiles. , instruments, power supply, high-speed rail and other industries.
7. Most potting glues have good temperature resistance and are more durable after being completely cured.
The operation process of two-component potting glue is not complicated and needs to be carried out step by step. Stir the materials evenly in advance and pour them into the gap at a uniform speed. If the first effect is not particularly satisfactory, a second pouring can be performed.