SMT Red Adhesive Glue for Stencil Printing Heat Curing Features & Benefits Tensan SMT red glue is a one-component epoxy adhesive, curing at high temperature. It is designed for SMD components on printed circuit board bonding. 4109A has suitable for high-speed SMT placement machine Dispensing and stencil printing. It is of high adhesive strength after curing . REACH, ROHS, certified Excellent thixotropy Good adhesive strength after curing Easy to mix and use
SMT Red Adhesive Glue for Stencil Printing Heat Curing
Features & Benefits
Tensan SMD red glue 4108A is a one-component epoxy adhesive, curing at high temperature.
It is designed for SMD components on printed circuit board bonding. 4108A has suitable for high-speed SMT placement machine Dispensing and stencil printing.
It is of high adhesive strength after curing .
◆ REACH, ROHS, certified
◆ Excellent thixotropy
◆ Good adhesive strength after curing
◆ Easy to mix and use
Typical Properties
Item |
Index |
Specific Gravity (g/cm3) |
1.28 |
Viscosity at 5rpm 25℃ |
300.000cps |
Adhesive Strength ( 2125c) |
44N(4.5kgf) |
Adhesive Strength (Mini-mold tr) |
45N(4.6kgf) |
Adhesive Strength (SOP-IC 16P) |
92N(9.4kgf) |
Thixotropy Index |
6.3 |
Electric Property (Ω.cm) |
2.6×1016 |
Resistance Insulation (Ω.cm) |
1.0×1014 |
Resistance Initial Value (Ω.cm) |
1.2×1012 |
Curing Condition |
150℃/60sec 130℃/90sec
|
Applying Method |
High -speed dispenser |
Dielectric Constant |
3.62/MHz |
Dielectric Loss Tangent |
0.013/1MHz |
Preservation Condition |
Refrigerated storage at 2-10℃ |
Package Style |
30ml/syringe 200g/syringe |
Instructions and Precautions
Cold storage 4108A to be rewarmed before use, 30ml syringe to be 1 hour, 300ml 24 hours. Storage tank or dispensing mouth temperature at 25℃-30℃ can
help improve the high-speed dispensing effect.
Precautions
1.In order to avoid contaminating unused glue, any glue can not be back into the original packaging.
2.Glue placing in the air will absorb trace moisture performance, which will influence the properties of glue, so it should be avoided. In the stencil printing,
do not put SMT printed circuit board in the air for too long,
patch curing as soon as possible, if possible, air humidity should be controlled.
Packing Information
30ml/syringe
200g/syringe
Storage andValidity
2-8℃, cool and dry place, it can be stored for 6 months; room temperature (25℃), it can be stored for 1 month.
Other Information
The above information are correct, but does not contain all of the information and can only be used as a guide.
This product great buy red glue is ROHS, REACH, compliant. Great buy red glue does not contain any unknow carcinogenic, mutagenic or teratogenic components.
For further info please visit our web: