Tensan UV adhesive shows remarkable performance. It cures rapidly, taking only 5 - 10 seconds under specific conditions, far exceeding ordinary UV adhesives. It has high bonding strength, with a tensile shear strength of over 20MPa for various materials, while common adhesives are around 10 - 15MPa. It has strong weather resistance, with minimal performance degradation after 1,000 hours of testing, unlike ordinary adhesives that are prone to aging and yellowing. It has good flexibility, and its special structure can buffer stress, differing from brittle adhesives. It has excellent transparency, with a visible light transmittance of over 95%, higher than ordinary adhesives with impurities and bubbles. It has good environmental protection, without formaldehyde, benzene and other VOCs, and no harmful gas emission during curing. Some ordinary adhesives contain harmful substances and release VOCs. It has significant application advantages in many industries.
This report centers on the comparison between Tensan Red Glue and other red glues. Tensan Red Glue shows superiority in performance. It has excellent viscosity, rapid curing with good heat and chemical resistance, precise glue dot control, favorable cleaning property and high reliability. In contrast, other glues have drawbacks like unstable viscosity and weak resistance in harsh conditions. Regarding cost-effectiveness, Tensan Red Glue boosts production efficiency and cuts waste. In application, it suits consumer electronics, automotive electronics and industrial control where high performance and reliability are essential, while others are restricted in such fields. Enterprises should consider multiple factors for glue selection.
This article deeply compares Tensan silicone potting with other common silicone potting. In terms of basic properties, Tensan silicone potting has a moderate and stable viscosity, a relatively fast and balanced curing time. In environmental resistance properties, it can resist heat up to 200°C, cold down to -45°C, and also has good moisture and chemical corrosion resistance. In electrical properties, it shows excellent insulation and a stable and suitable dielectric constant. It has good adhesion to substrates and long-term stability. In environmental protection and safety, it complies with environmental protection standards, has a low VOC content and a mild curing process. Overall, Tensan silicone potting has significant advantages in many aspects and is an excellent choice for many application scenarios.
This introduction focuses on the comparison between Tensan Thermal Pads and other thermal pads. Taking the TS300 model of Tensan Thermal Pad as an example, it has a thermal conductivity of 3.0 W/m-k, high adhesion material characteristics, excellent stability, and is suitable for various electronic devices with obvious cost-effectiveness advantages. In contrast, other thermal pads have different performances in terms of thermal conductivity, materials, application scenarios, and prices, aiming to clearly present the product characteristics for relevant practitioners and consumers and help with product selection decisions.
Tensan TS - 1101 thermal grease is a high-performance heat dissipation material with a thermal conductivity of 4.5 W/(m·K) and a working temperature range from - 45℃ to 200℃. It features excellent thermal conductivity, insulation, wettability and a long service life. It is applicable to the heat dissipation requirements of various fields such as computers, microwave equipment, and automotive electronics, facilitating the efficient and stable operation of electronic components and reducing the risk of overheating failures.
Tensan is a leading manufacturer specializing in the development and production of LED adhesives, providing high-performance bonding solutions for lighting, displays, and automotive lighting industries. Our products are renowned for their superior performance and reliability, serving customers in countries including Indonesia.