Silicone sealant is a type of sealant. This kind of sealant is divided into two types: single-component and two-component. Single-component silicone sealant is easy to use and does not require complicated steps. So one-component silicone sealant is so easy to use, but what about its bonding ability?
Thermal conductive gaskets, also known as thermally conductive silicone sheets, are mainly used for the transfer interface between electronic equipment and heat sinks or product shells. They have good viscosity, flexibility, compressibility and excellent thermal conductivity, allowing them to fully utilize electronic originals during use. The air between the heat sink and the heat sink is exhausted to achieve sufficient contact and the heat dissipation effect is significantly improved. The operation process of the thermal pad is relatively simple, but there are a few points that need to be paid attention to. A little carelessness may damage the heat dissipation function of the silicone sheet. Today I will mainly talk about the correct use of thermal pads.
The sealant does not cure for a long time because the product has expired, the storage environment is inappropriate, and the sealant is affected by the surrounding environment during the curing process. The first two factors can be achieved as long as we pay a little attention, so how should we avoid the third factor?
The sealant does not cure for a long time because the product has expired, the storage environment is inappropriate, and the sealant is affected by the surrounding environment during the curing process. The first two factors can be achieved as long as we pay a little attention, so how should we avoid the third factor?
The sealant does not cure for a long time because the product has expired, the storage environment is inappropriate, and the sealant is affected by the surrounding environment during the curing process. The first two factors can be achieved as long as we pay a little attention, so how should we avoid the third factor?
Thermal gel series products are a two-component preformed thermally conductive silicone grease product that mainly meets the needs of low pressure and high compression modulus when the product is in use. It can realize automated production and have good contact and performance when assembling electronic products. It has low contact thermal resistance and good electrical insulation properties. This material has some advantages of both thermal pads and thermal grease, which better makes up for the weaknesses of both.
