Industry dynamic

Will the improper ratio of silicone potting adhesive affect the quality? How to follow the scientific ratio to blend?

2021-04-26

Will the improper ratio of silicone potting adhesive affect the quality? How to follow the scientific ratio to blend?

When mixing silicone potting adhesive, the ratio is very important. Once the AB agent is not blended following the scientific ratio, it will affect the overall quality. Even now the quality of adhesives has been greatly improved, but can not ignore the proportion of blending, or there will be many problems.

What problems will occur if the proportion of silicone potting adhesive is not appropriate?

Operation before the normal ratio of AB agent, will lead to abnormal curing or even can not be cured. As we all know, after the adhesive is fully cured, it can show various properties. Can not be cured properly, will lose its use-value, affecting the later use effect.

Sometimes the adhesive can not be completely cured, not necessarily the product quality problems, but not under the normal proportion of the deployment. Please choose high-quality products, according to the scientific ratio to mix the glue, so that it can play a better role.

How to mix the adhesive according to the scientific ratio?

For regular adhesives, there are instructions for use. Just follow the scientific ratio given in the manual, and mix the AB agent according to the weight ratio of 1:1, which is easy and trouble-free. Use accurate weighing to minimize the error. Some users think that it does not matter much if the AB agent is more or less, so they weigh it casually. Later, when the use of a little more or less is found to be very important, directly affecting the curing effect.

AB agent following the correct proportion of the proportion put into a clean vessel for uniform stirring. Stirring more evenly is more helpful for curing. The ratio and stirring work to do some fine, to minimize the appearance of air bubbles, so that the curing effect is guaranteed. If there is a problem with curing later, you can find the reason from the ratio, stirring, and other procedures, and try not to affect the overall


We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept