As you know, for the vast majority of the period is not difficult to use thermal conductive adhesive, but the use of the appropriate method to give the best results, the next small introduction to the best way to use thermal conductive adhesive introduction.
First, the design of the sealing interface must be noted
People who have used glue products know that its interface at the smallest and deepest can reach six millimeters, the use of the interface width and depth are to be larger than the depth of the glue mouth, so that do sticky interface out is to have a certain degree of space for movement, the bonding, and bonding when the solidity is of great benefit.
Second, the need to do the bonding process without the surface to keep clean
When we need to bond the type of things like fish glass on the smooth interface, if there is something dirty on it, to solve it, they still need a clean rag to wipe clean, the bonding effect will be better.
Third, after the bonding good, need to have a certain amount of parking time
All the heat-conductive adhesive in use is to make the bonding material rest for some time, such as the need to rest for more than forty-eight hours, because the effect of such a bond will be guaranteed, however, the use of heat-conductive adhesive is different, forty-eight hours, if you do not touch the interface of the bonding material, do not use any cleaning agents to clean it, then the bonding effect will achieve the highest guarantee.
Also, it is worth mentioning that if the interface is damaged, it is normal and inevitable, as long as you remove the damaged part, and then clean the surface, and then apply the thermal adhesive.