TS8866 is a two-component addition-cured silicone gel, specially designed for the production of stress-relief toys. It can cure into a soft and sticky gel at room temperature, and the curing process can be accelerated by heating it to 40-50℃. The product is flexible and soft, meeting the needs of different customer groups and achieving a stress-relief effect.
Features & Benefits
Two-component silicone potting, 1 to 1, curing at room temperature or by heating
Application
Description
TS8866 is a two-component addition-cured silicone gel, specially designed for the production of stress-relief toys. It can cure into a soft and sticky gel at room temperature, and the curing process can be accelerated by heating it to 40-50℃. The product is flexible and soft, meeting the needs of different customer groups and achieving a stress-relief effect.
Typical Properties
| Before curing |
|
Item |
Index |
Appearance |
Part A: Translucent fluid Part B: Translucent fluid |
|
Viscosity mPa·s (25℃) |
Part A: 2400 Part B: 2000 |
|
Mix Ratio |
1:1 |
|
Density g/cm3 (25℃) |
Part A: 1.05 Part B: 1.05 |
|
After curing |
|
Appearance |
Transparent elastomer |
|
Working Time at 25℃ (minutes) |
30-40 |
|
Room temperature curing (25℃,H)
|
2-4 |
|
Heat Cure Time minutes/℃ |
40-50/25 |
|
Thixotropic Index |
250-320 |
Storage and Validity
This product is non-dangerous goods.The used materials must be re-sealed for preservation.Stored in room temperature, and in a cool, ventilated, dry place. Shelf life: 12 months
Processing Method
Notes:
The adhesive should be stored in a sealed and cool place. The prepared adhesive should be used up in one go to avoid waste. Some materials, such as chemical curing agents and plasticizers, can cause catalysts to lose their effectiveness and be poisoned, thereby inhibiting the curing of the adhesive. The following materials need special attention:
How Can We Help You Today
