Modern computers generate heat that is mainly emitted through the upper surface of the component, so it is important to have low thermal resistance in the connection area, which is associated with the proper operation of the heat sink. LEDs are favored by the majority of users for their small size, low power consumption, environmental friendliness, robustness, and rich color of the light source. However, one of the bottlenecks facing the development of LED lighting is heat dissipation, which can be solved with a thermally conductive adhesive.
There are two types of electronic potting adhesives - one-component and two-component - and the scope of application varies between them. It is important to choose the most suitable product for the specific application so that it can perform its characteristics and reduce waste and cost.
Thermally conductive adhesive is a single component, thermally conductive, room temperature curing silicone adhesive sealant, through the condensation reaction of water in the air to release low molecules caused by cross-linking curing, and vulcanization into high-performance elastomer, thermally conductive adhesive, also known as organic silicon thermal adhesive, thermal silicone, heat dissipation silicone, heat transfer adhesive, Schneis thermal adhesive, heat dissipation adhesive, cooling adhesive
When using two-component potting adhesives, there are certain operating techniques to follow. Understanding the specific operating process and following the step-by-step mixing and pouring process will greatly enhance the value of the application. Pay more attention to various matters to improve the effect after curing.
Nowadays, electronic products or electrical appliances cannot be produced without potting adhesives, which can be used for the overall sealing of parts and components, as well as for the bonding and fixing of electronic components. Usually two-component potting adhesive is more suitable for the overall parts of the potting, potting can strengthen the performance of electronic products, the use safer. When bonding electronic components, a one-component electronic potting adhesive is usually used, which is easy to operate and suitable for both manual application and automatic assembly line application.
Among the thermally conductive materials, thermally conductive silicone grease has good performance and better thermal conductivity compared to other materials. It is mainly composed of silicone and some heat dissipation materials. This kind of silicone grease will not be cured after use, and it will become slightly dry after years of use, but it will not affect the performance. You need to pay more attention when constructing it. The following is a brief introduction on how to add thermal conductive silicone grease.
