Industry dynamic

Is the thermal conductivity of thermal paste great? How to apply thermal paste correctly?


Some people don't know why to use thermal paste? Use it in the gap between the heat sink and the CPU to fill and improve heat dissipation. With the help of this adhesive, components can be tightly bonded together for better thermal conductivity.


Is thermal paste effective?

Don't underestimate the role of thermal paste. Without this adhesive to exert thermal conductivity, the radiator cannot play its own role. The combination of the two can exert good thermal conductivity and improve the service life of components. Choose high-quality thermal paste, cooperate with powerful suppliers, and feel more assured. For example, TENSAN focuses on thermal paste research and provides customized thermal paste application solutions. It has a wide range of uses and can be used in new energy, military, medical, aviation, ships, electronics, automobiles, instruments, power supplies, high-speed rail, and other industries.

How to apply thermal paste correctly?

For beginners, they will rub in circles, this method is not very easy to use, and it is impossible to apply the coating evenly, which affects the thermal conductivity. You can squeeze out an appropriate amount of thermal paste and push it from the middle to the four sides with a card until it is evenly spread. If there is overflow around, please wipe it clean in time, otherwise it will cause a short circuit.

What should we pay attention to when using thermal paste?

1.  You can use a scraper or card to smear directly and clean up the excess adhesive. Do not affect the flatness.

2.  The thermal paste will not cure during use. After the smear is completed, the components are directly installed, and it will be better to use with a certain pressure of extrusion.

3.  There is no standard statement on how to apply thermal paste. During the smearing process, it is enough to make the adhesive layer even and free of air bubbles.

When applying thermal paste, keep the adhesive layer as thin as possible. The thinner the adhesive layer, it has a great help to improve the thermal conductivity. At the same time, the adhesive layer is thinner, which saves the use of adhesive and reduces the cost of investment. Patiently smear, smear each drop of thermal conductive paste evenly and delicate. As far as possible to reduce the appearance of bubbles, play a greater value.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept