Industry dynamic

Is the potting glue easy to store? Is there anything to pay attention to during the glue mixing process?


When using potting glue, a little carelessness will affect the service life. Some users did not do a good job during the storage process, resulting in qualitative changes in the adhesive and loss of use value. To avoid wasting materials and wasting money, do a good job of saving.

Is the potting compound easy to store?

1. When storing the potting compound, it should not be directly exposed to the sun, let alone placed under high temperature, so as not to cure in advance. Before the adhesive is opened, it will become soft when it encounters a high temperature of 50 or 60 degrees, and it cannot be used after degumming. Put it in a cool and ventilated place to avoid qualitative change.

2. The shelf life of most potting adhesives is half a year to one year. If precipitation occurs and cannot be mixed evenly, it cannot continue to be used. Change positions regularly to avoid layering as much as possible.

What should be paid attention to in the process of mixing glue?

1. According to the actual dosage, mix the potting glue according to the scientific ratio. If the amount of agent B is too much, it may not be cured. If the content of agent B is too small, the curing speed will be slowed down, or the adhesive layer is too soft to exert its proper mechanical strength.

2. After mixing the glue, do not stir it vigorously. Stir at a constant speed in the same direction to make the materials fully mixed and avoid bringing in air. Choose high-quality adhesives and cooperate with powerful suppliers, so you can feel more at ease, such as TENSAN, which focuses on potting adhesive research and provides customized potting adhesive application solutions. It has a wide range of uses and can be used in new energy, military, medical, aviation, and ships. , electronics, automobiles, instruments, power supplies, high-speed rail and other industries.

3. During the operation, if you encounter excess adhesive, wipe it clean with cleaning agent. Or wait for it to solidify and cut it off directly.

4. For adhesives that have been opened and not used temporarily, do a good job of sealing. Store in a cool and ventilated place to avoid waste.

Keep the temporarily different potting glue well so as not to delay the next use. When using it again, adjust the glue, stir and pour according to the correct method, so as not to affect the overall effect. After normal curing, it will play more performance.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept