The role of the thermal pad The heat-conducting pad plays a role of heat-conducting, and a good heat-conducting channel will be formed between the heat-dissipating devices in the hot spot so that it can become a fixed heat-dissipating module. Then the last is about good thermal conductive pad to fill the contact gap of what, also can be in the air out of the air inside is a very poor conductor, will also hinder the heat transfer between, so the thermal conductive pad complement the success of the contact area can be fully contacted, so on the temperature can reach as far as possible small temperature difference.
The thermally conductive silicone pad is used to fill the air gap between the heating unit and the radiator or metal base. Their flexibility and elasticity make it possible to cover very uneven surfaces. Heat is transferred from the separation unit or the entire printed circuit board to the metal case or diffusion plate. The silicone pad conducts heat, which can improve the efficiency and service life of heating electronic components.
For computers, the heat-conducting silicone grease is used to increase the bonding between the CPU and the radiator. Choosing the right smear method can ensure that the CPU temperature is reduced by 4-7 degrees. The purpose of this article is to introduce how to use thermal conductive silicone grease on computers.
The silicone grease used for LED lamps is different from the silicon grease used for CPU radiators. LED lights are generally used for a long time, especially some outdoor lighting, the working time is usually more than 10 hours. At this time if the choice of thermal silicone grease is not right, is very affect the life of the lamp.
Red glue is a poly-silk compound, unlike tin paste, which is cured after heating, and its solidification point temperature is 150 degrees C,then the red glue begins to change directly from the paste body to a solid. Red glue belongs to SMT material. Red glue has viscosity fluidity, temperature characteristics, wetting characteristics, etc. According to this characteristic of red glue, in production, the purpose of using red glue is to make the part firmly paste on the PCB surface to prevent it from falling.
tensan Irrigation glue manufacturers tell you that silicone potted glue is good adhesive products, its performance advantages outstanding, gradually recognized by the industrial field, has been widely used in precision electronic components, solar energy, and other devices bonding irrigation.
