Thermal grease is actually what we often call thermal grease. This material is a composite material, which can be used not only in high-power electrical appliances but also in electronic instruments such as electronic tubes or CPUs. Because these areas of use pay special attention to safety issues, if it has flame-retardant insulation properties, it can reduce the impact even if the electrical appliance is connected to electricity. Will it cause the silicone grease to be flame-retardant? What is the use skill?
There are two main processes commonly used in the red glue dispensing processing of SMT patch processing. One is to use a needle tube for dispensing, and the amount of red glue used in the SMT patch varies with the components. There are generally two ways to change, manual and automatic dispensing machines, and the other is to use SMT-processed steel mesh to perform red glue printing by brushing glue.Either way may cause some machining problems, so how do these machining defects arise?
With the improvement of people's living standards, lighting products have entered thousands of households. Most lighting products use silicone adhesives, mainly to bond, fix and seal the components of the lamps. However, in order to produce lighting products with high quality and up to standard service life, the choice of adhesive is very important. Today, TENSAN will introduce to you what key properties should be paid attention to when applying silicone adhesives to lighting products.
Among the heat dissipation materials, thermal grease has a higher use value, which makes the CPU work at normal temperature and greatly prolongs the service life. However, it is not the same as most heat-dissipating materials. It needs to be applied in the correct way to avoid waste of materials and show a better heat-dissipation effect.
Sealing potting compounds are used in a wide range of fields and play a variety of properties. However, there is a premise for the performance of various properties, that is, the adhesive needs to be fully cured. After the curing is successful, a thin and elastic adhesive layer will be formed, which has a better use effect. So, why doesn't the sealing potting compound cure? How to solve the problem that the sealant does not cure?
As we all know, adhesives not only need a skilled bonding process but also need some equipment to assist when bonding. So, do you know what equipment is needed for adhesive bonding? Today, I have sorted out some of the equipment needed for adhesive bonding and recommended adhesive brands with good quality and guaranteed quality. Hope it can be of some help to you all!
