Thermal pads are specially produced for the design scheme of using gaps to transfer heat. They can fill gaps and complete the heat transfer between the heat-generating parts and the heat-dissipating parts. At the same time, they also play the roles of insulation, shock absorption, sealing, etc. Ultra-thin design requirements.
If you only need potting and waterproof insulation, the above three can be done; for the choice of soft glue or hard glue, if high temperature resistance is required, it is recommended to use silicone soft glue; if low temperature resistance is required, it is recommended to use polyurethane soft glue; if there is no requirement, epoxy hard glue is recommended because epoxy hard glue cures faster than silicone.
When using silicone sealants, it is possible to experience problems such as peeling, cracking, or incomplete curing. The reason is directly related to the operation method. The operation method is incorrect, which directly affects the curing and performance.
There are many differences between thermally conductive gel and thermal grease, such as materials, characteristics, construction methods and service life. It has been shown in many ways that thermally conductive gel is not thermally conductive silicone grease, and both have their own uses. Customers can choose to use thermally conductive gel or thermally conductive silicone grease or other thermally conductive materials according to product characteristics and structural requirements.
When using silicone sealants, it is possible to experience problems such as peeling, cracking, or incomplete curing. The reason is directly related to the operation method. The operation method is incorrect, which directly affects the curing and performance.
According to different application scenarios and the power of the heating source, the corresponding parameters of the thermally conductive silicone sheet should be selected, such as: the thickness of the thermally conductive silicone sheet, thermal conductivity, and breakdown voltage, which should be paid attention to in the actual use process.
