thermal potting Manufacturers

Tensan thermal pads have outstanding performance in multiple aspects. In thermal conductivity, advanced technology enables efficient heat transfer, far better than ordinary pads. It has excellent insulation performance, preventing leakage and short circuits, while some ordinary pads have potential risks. It has a wide temperature resistance range and remains stable at high temperatures, while ordinary pads are prone to aging and failure. With good flexibility, it can closely fit heat dissipation surfaces, while ordinary pads may have poor contact. Its compression and rebound performance is excellent, maintaining well after multiple compressions, while ordinary pads have a rapid decrease in rebound rate. Although Tensan thermal pads have obvious advantages, the actual selection still needs to be comprehensively considered according to equipment and working conditions, providing an important reference for material selection in the heat dissipation field.

What impacts may have for electronic products if using inferior potting compound ? Shenzhen Tensan company will talk about it . Using bad quality potting silicone on electronic products leads to poor electrical performance and insulation ability. Electronic components will affect each other after potting which could easily cause malfunction for electronic components . Furthermore,bad silicone potting has poor heat and cold resistance , it is difficult to bear changes between cold and heat, then the cracking cured silicone, so that rainwater penetrates into electronic components , reducing the moisture resistance of electronic products and causing electronic elements device failure. Thirdly, inferior potting compound has poor performance like poor thermal conductivity, bad high and low temperature resistance, and poor flame retardancy. It is not so effective to improve the heat transfer performance and safety factor of electronic products .

Electronic sealant has a waterproof, sealing, moisture-proof role after curing, used in electronic production, can strengthen the electronic performance, improve the practicality. The market needs more and more, there are one-component electronic sealants and two-component electronic sealants, a variety of brands into the market, the quality varies, and the quality of substandard electronic sealant is not recommended to buy large quantities of use. The reasons are as follows.

Today Shenzhen Tensan is going to share the the concept of thrmally conductive pad. Thermally conductive silicone pad is one of the widely used thermal interface materials. It is in the form of a sheet, with high compressibility, high reliability, high temperature resistance, excellent thermal conductivity and insulation. The surface is self-adhesive, and the construction is simple and convenient. According to the size and shape of the heating device, the die-cutting die can be arbitrarily.

Among the types of potting glue, silicone potting glue is widely used because the colloid has poor mechanical properties after curing and can be easily broken apart to replace components. However, polyurethane potting glue does not have this performance, thus limiting the field of use. Only reasonable application of silicone potting glue can achieve the desired potting effect.

When formulating silicone potting compound, the proportion is very important. Once the AB agent is not prepared according to scientific proportions, the overall quality will be affected. Even though the quality of adhesives has been greatly improved nowadays, the mixing ratio cannot be ignored, otherwise many problems will occur.