Electrical appliances in the production process there is the use of potting glue, potting glue not only has a bonding performance, there is a good waterproof, moisture-proof, anti-corrosion effect, good quality curing also has insulation properties, effective protection of electrical appliances using safety. Potting glue belongs to a liquid with fluidity.
When using the sealant, there is a possibility that it does not cure. When it does not cure properly, it will affect the performance of various properties and even lose its use-value. Know the causes of non-curing and the correct way to deal with it, and use it with confidence. One-component products do not cure the reasons
Some electronic potting adhesives are hard after curing, and some products are soft. Can not simply judge which adhesive is better, according to the use of the situation to choose hard or soft products. Play a good bonding, play a protective role.
Some electronic potting adhesives are hard after curing, and some products are soft. Can not simply judge which adhesive is better, according to the use of the situation to choose hard or soft products. Play a good bonding, play a protective role.
Different users have different habits of using adhesives and may encounter different problems. Some users find the phenomenon of dry glue when they operate. Find the reasons and solutions for the appearance of dry glue, and do not cause waste as much as possible.
Why is it necessary to do a compatibility test? There is a possibility that the sealant is compatible with the bonded object, so do a good compatibility test to see if it can be tested properly. If the test result proves that the adhesive is incompatible with some base materials, even if it can show various properties, it cannot be tested normally. At that time, there is no big problem to use, time will appear the respective problems. For example, color loss or peeling, leaving safety hazards. Do the compatibility test in advance to ensure that the adhesive plays a better bond for long term use.
